The Bissell Proheat 2X Revolution Pet Pro is a powerful carpet cleaner that can remove even the toughest stains. However, if you want to keep your cleaner working properly, you need to take it apart and clean it regularly. Here's a step-by-step guide on how to take apart the Bissell Proheat 2X Revolution Pet Pro:

How to Take Apart Bissell Proheat 2X Revolution Pet Pro

Remove the Water Tank

1. Unplug the cleaner and remove the water tank from the back of the unit.

2. Open the lid of the water tank and remove the water filter.

3. Rinse the water tank and the water filter thoroughly with warm water.

Remove the Dirt Tank

1. Locate the dirt tank at the bottom of the cleaner.

2. Unlatch the dirt tank and remove it from the cleaner.

3. Empty the dirt tank into a trash can.

Remove the Brush Roll

1. Turn the cleaner on its side.

2. Locate the brush roll access panel on the bottom of the cleaner.

3. Remove the screws from the access panel and remove the panel.

4. Pull the brush roll out of the cleaner.

Clean the Brush Roll

1. Rinse the brush roll with warm water.

2. Use a soft brush to remove any hair or debris from the brush roll.

3. Allow the brush roll to air dry completely.

Reassemble the Cleaner

1. Insert the brush roll back into the cleaner.

2. Replace the brush roll access panel and secure it with the screws.

3. Reattach the dirt tank to the cleaner.

4. Reattach the water tank to the cleaner.

5. Plug in the cleaner and turn it on.

Tips

1. Clean the Bissell Proheat 2X Revolution Pet Pro after each use.

2. Rinse the water tank and the water filter with warm water after each use.

3. Empty the dirt tank after each use.

4. Clean the brush roll every month or so, depending on how often you use the cleaner.

5. Replace the water filter every 3-6 months.