The Bissell ProHeat Pet Carpet Cleaner is a powerful and versatile machine that can make quick work of even the dirtiest carpets. However, like all appliances, it needs to be taken apart and cleaned occasionally in order to keep it running at its best. Here's a step-by-step guide on how to take apart a Bissell ProHeat Pet Carpet Cleaner:

How to Take Apart a Bissell ProHeat Pet Carpet Cleaner

Tools You Will Need:

• Phillips head screwdriver • Flat head screwdriver • Bucket • Rags • Detergent • Water

Step 1: Unplug the Machine and Empty the Tanks

Before you begin taking apart the machine, make sure it is unplugged from the power outlet. Then, empty the clean and dirty water tanks. To do this, locate the caps on the front of the machine and unscrew them. Pour the water into the bucket.

Step 2: Remove the Front Cover

The front cover of the machine is held in place by four Phillips head screws. Locate these screws and remove them. Once the screws are removed, you can lift the front cover off of the machine.

Step 3: Remove the Brush Roll

The brush roll is located in the center of the machine. To remove it, first remove the two screws that hold it in place. The brush roll can now be pulled out of the machine.

Step 4: Clean the Brush Roll

The brush roll should be cleaned regularly to prevent it from becoming clogged with dirt and hair. To clean the brush roll, soak it in a bucket of warm water with detergent. Use a rag to scrub the brush roll until it is clean. Rinse the brush roll thoroughly with water and allow it to dry completely before replacing it in the machine.

Step 5: Clean the Inside of the Machine

Use a damp rag to wipe down the inside of the machine. Be sure to clean the areas around the brush roll and the water tanks. You can also use a vacuum cleaner to remove any dirt or debris from the machine.

Step 6: Reassemble the Machine

Once the machine is clean, you can reassemble it. To do this, simply follow the steps in reverse order. First, replace the brush roll. Then, replace the front cover. Finally, screw the clean and dirty water tanks back into place.

Step 7: Test the Machine

Once the machine is reassembled, test it to make sure it is working properly. Fill the clean water tank with water and detergent. Place the machine on a dry carpet and turn it on. If the machine is working properly, you should see water and detergent being sprayed onto the carpet.

Conclusion:

Taking apart and cleaning a Bissell ProHeat Pet Carpet Cleaner is a relatively simple task that can be completed in a few minutes. By following the steps in this guide, you can keep your machine running at its best and extend its lifespan.